ALP-DRY SPOT

 

ALP-DRY SPOT
Allopar ALP-Spot Remover is designed to easily remove stuff stain of all type of fabrics without harming delicate fibers. Unlike other powdered sprays. Allopar ALP dose not contain any chlorinated solvents or other toxic chemicals. ALP has a low order will not “RING” and dries quickly. Use on silk, satin, cotton, wool, taffeta, polyester, blends and all other fabrics.

DANGER EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE. DO NOT STORE IN TEMPERATURE EXCEEDING 120 F. KEEP OUT OF REACH CHILDREN.
WARNING:
Do not spray on hot surfaces. Keep away from heat, sparks, open flame, heated surfaces and any other source of ignition.
Exposure to heat make cause bursting. Do not take internally. Harmful or fatal if swallowed. Vapor harmful use only in well ventilated area. Do not puncture or incinerate container. Intentional misuse by deliberately inhaling concentrated vapors maybe harmful or fatal. Avoid prolonged breathing of vapor and prolonged contact with skin. If contact occurs. Flush thoroughly with water.
CONTAIN- Pentane (CAS # 109-66-0), Heptane (CAS # 142-82-5), and Hydrocarbon propellant (CAS # 68476-86-8) .Refer to the MSDS for further warnings. USE IN WELL VENTILATED AREA. Preferably use with a vacuum extraction system such as WORKHORSE OR AIR-DEVIL CLEANING STATIONS.
Vapors are harmful to humans. Use with adequate ventilation to keep exposure levels below the recommended permissible exposure level (25ppm). Consult product MSDS for additional information regarding exposure concerns. Avoid breathing the fumes or white powder dust particles as they contain chemical cleaning products while wet, if no exhaust system is available, or if your area has poor air movement,or if your area has low ceilings, then we suggest using out-of-doors. CONTENTS UNDER PRESSURE. DO NOT STORE NEAR HEAT ABOVE 120F OR OPEN FLAMES

MSDS | Catalogue